Menu

CPCS A09 Forward Tipping Dumper Course Northern Ireland

There are a number of activities involved with the CPCS Forward Tipping Dumper technical test including;

1. Complete all manufacturers’ pre-start and running checks and prepare the dumper for travel
2. In a loaded and unloaded state;
a. Travel up and down the slope
b. Stop and start on the slope in the up direction
c. Stop and start on the slope in the down direction
d. Pass through a chicane executing full right and left turns in a forward and reverse direction (unloaded only)
e. Travel over rough terrain
f. Reverse (loaded only) in a straight line for a minimum of 30 metres and pass through a restriction at the end of the run.
3. Position the dumper for loading
4. Receive a load
5. Discharge the load into the edge of excavation
6. Form a stockpile
7. Clean out the skip fully
8. Park the dumper and carry out shut down and securing procedures

We can carryout the entire CPCS Forward Tipping Dumper qualification at our training centre in Lisburn.

For more information please contact us on Tel; 02892639459 or info@bsdtraining.com